TLW2-12BL (4G LTE)

4G CAT-M1 network global bands with 2G fallback is supported

TLW2-12BL hardwired has multiple I/Os that could be used for ignition detection, relay, buzzer, SOS button, analog fuel sensors, or your own accessories. When working with BLE sensors it can monitor the temperature, humidity, door status, etc. It’s an all-in-one model to serve your needs for customised solution.

Certifications

PTCRB
AT&T
T-Mobile
U.S Cellular

Fixed reporting interval

Regular location updates to reduce power consumption.

Rugged construction

Thick and solid casing and rugged construction for outdoor uses.

Long life Battery

non-rechargeable 8100 mAh/3.6V battery, can be replaced from us at a small cost.

IP67 waterproof

Tested in 5-meter water pressure environment for 15 hrs.

Removal alerts

Alerts sent when device is pulled off from asset.

Easily installation

It can be mounted with magnets, screws, polyurethane or heavy-duty tape by end users

Network/Operating Band

Operating Band
FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28
TDD: B39 (Cat M1 only)
EGPRS 850/900/1800/1900MHz
Data Transmission
eMTC: Max. 300Kbps (DL), Max. 375Kbps (UL)
NB1: Max. 32Kbps (DL), Max. 70Kbps (UL)
EDGE: Max. 296Kbps (DL), Max. 236.SKbps (UL)
GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL)

GNSS

GNSS Chipset
Qualcomm Gen 8C GNSS receiver
Receiver Type
33 tracking / 99 acquisitions- channel GNSS receiver
Positioning accuracy
Autonomous < 2m
Parallel GNSS
GPS+Glonass+Galileo+Beidou
Sensitivity
Cold start: – 149 dBm
Tracking: -163 dBm
Standalone TTFF
Cold start: < 29s
Warm start: < 27s
Hot start: < 1s

Interfaces

Charging and Data Transmission
4 Pin port with magnet
Network, GNSS Antenna Indicator
Internal only
LED
Network, GNSS and Battery
FOTA
Yes
Light Sensor
1 back light sensor
Physical Power Switch
1
Temperature Sensor
1 temperature sensor

General Specifications

Waterproof
IP67
Dimensions
69.3mm* 143mm*24.8mm (2.72″ *5.63″ *0.98″)
Weight
210g (7.4oz)
Battery
Non – rechargeable 8100 mAh/ 3.6V Li battery
Standby Time
(One Report per Day)
1 Year@every 2 hrs reporing
3Years@every 12 hrs reporing
5Years@every 24hrs reporing
Max every 5 mins reporting in recovery mode
Data Communication
Magnetic USB cable
Operating Temperature
-20°C – +80°C (-4°F – 176°F)
Mounting
Magnet/Screw

Air Interface Protocol

Transmit Protocol
TCP, UDP, MQTT, SMS
Data Security & Encryption Option
MD5/ AES256
Scheduled Timing Report
Report position and status at preset intervals
Geo-fence
Support up to 64 internal geo-fence regions
Vibration Detection
Vibration alarm based on internal 3-axis accelerometer
Removal Alarm
Sending alarm when the light sensor detecting the light changing

Leaflet

Applications

Request quotation