TLW2-12B

TLW2-12b

LTE Cat-M 1 (eMTC)/Cat-NB1 (NB-loT) and GSM assets tracking devices for wide ranging applications

It can be powered when wired and towed by trucks and operate on only battery when trailers standing alone (power disconnected).

The multiple inputs and output scould be used for connecting accessories.

Certifications

PTCRB
AT&T
T-Mobile
U.S Cellular

Market

North America

Real time and buffer locations

Real time location updates can be as frequent as 3s. Up to 60,000 location points can be saved in buffer if out of network coverage.

Low power consumption

9600 mAh/3.6V battery to run for up to 20 days(5 mins reporting) without charging

IP67 waterproof

Tested in 5-meter water pressure environment for 15 hrs

BLE 5.0 for sensors

Compatible with TOPFLYtech’s BLE temp & humi sensor TSTH1-B, temp & door sensor TSDT1-B, wireless relay TSR1-B and your own sensors

Movement alerts

Alerts for asset moving and parking

Disconnection alerts

Alerts for device disconnected from power

Easy installation

It can be mounted with magnets, screws, polyurethane or heavy-duty tape by end users

3 Configurable inputs

Input that can be used as digital or analogue input. Usually used for TOPFLYtech’s ultrasonic analogue fuel sensor

3 Digital outputs

Compatible with wiring relay, buzzer and siren for vehicle immobilisation for anti-theft

Network/Operating Band

Operating Band

FDD: B1/B2/B3/B4/B5/B8/B12/ B13/B18/B19/B20/B25/B28
TDD: B39 (Cat M1 only)
EGPRS 850/900/1800/1900MHz

Data Transmission

eMTC: Max. 300Kbps (DL), Max. 375Kbps (UL)
NB1: Max. 32Kbps (DL), Max. 70Kbps (UL)
EDGE: Max. 296Kbps (DL), Max. 236.SKbps (UL)
GPRS: Max. 107Kbps (DL), Max. 85.6Kbps (UL)

GNSS

GNSS Chipset

Qualcomm Gen 8C GNSS receiver

Receiver Type

33 tracking I 99 acquisitions- channel GNSS receiver

Positioning accuracy

Autonomous < 2m

Parallel GNSS

GPS+Glonass+Galileo+Beidou

Sensitivity

Cold start: – 149 dBm
Tracking: -163 dBm

Standalone TTFF

Cold start: < 29s
Warm start: < 27s
Hot start: < 1s

Interfaces

Digital Input

3

Digital Output

3

Configurable Input (Digital/Analog)

3 (input range 0-32V, >6V trigger in digital)

Voltage Output (DC 5V/ 12V)

1

Charging and Data Transmission

DC 7-60V or USB cable

Network, GNSS Antenna

Internal only

Indicator LED

Yes

FOTA

Yes

Light Sensor

1 back light sensor

Temperature Sensor

1 temperature sensor

BLE 5.0

Yes

General Specifications

Waterproof

IP67

Dimensions

132mm*l00mm*34mm (5.2″*3.93″*1.34″)

Weight

320g (11.3oz)

Battery

Rechargeable Li 9600 mAh/ 3.6V

Standby Time
(2 hours active tracking per day
without accessories and charging)

10 minutes reporting: 320 Days
5 minutes reporting: 170 Days
1minute reporting: 68 Days

Charging & Data Communication

Magnetic USB cable
(Recommend using 5V 1A adaptor, 20 hours charging)

Operating Temperature

-25C +80C (-13F, ~ 176F)

Mounting

Magnet/Screw

Air Interface Protocol

Transmit Protocol

TCP, UDP, MQTT, SMS

Data Security & Encryption Option

MD5/ AES256

BLE Accessory Support

Yes

Scheduled Timing/angle/distance Report

Report position and status at preset intervals

External Power Status Alarm

Report when external power is disconnected

Low Power Alarm

Report when backup battery is low

Remote Control

Remote output control

Removal Alarm

Sending alarm when the light sensor detecting the light changing

Leaflet